| 加入日期: | 2020.07.04 |
|---|---|
| 地 區: | 浙江省 |
| 內 容: | ****控股集團 **吉茨寧機電設備有限公司 EE測試設備項目 招標公告 采購類別:設備類(注:新用戶時請選擇此類別,否則無法報名) *.項目名稱:EE測試設備項目 *.項目概況與招標范圍 *.*項目概況: 本次招標主要是為了滿足DHT項目軟件開發過程中的測試驗證需求。投標方 |
|
序號
|
貨物名稱/供貨范圍
|
主要技術規格
|
數量
|
|
1
|
電源控制箱
|
選擇合適尺寸的標準桌面式電源控制箱
|
1
|
|
2
|
激勵模塊
|
<!--[if !supportLists]-->l <!--[endif]-->提供≥4路通道用于連接ECU輸入
<!--[if !supportLists]-->l <!--[endif]-->每路通道上包括用于切換的繼電器,電壓激勵和十進制電阻器
|
1
|
|
3
|
通用數字I/O模塊
|
提供≥48路可獨立配置的數字I/O
|
1
|
|
4
|
電源管理模塊
|
<!--[if !supportLists]-->l <!--[endif]-->控制ECU的供電端口(如15線與30線)
<!--[if !supportLists]-->l <!--[endif]-->可以控制兩路外部電源給ECU供電
<!--[if !supportLists]-->l <!--[endif]-->可以測量各個端口的電壓與電流。
|
1
|
|
5
|
CAN總線干擾儀
|
<!--[if !supportLists]-->l <!--[endif]-->可以干擾所有/指定CAN報文的任何一個位
<!--[if !supportLists]-->l <!--[endif]-->可測試總線位時間,隱形/顯性電平,信號上升/下降斜率
<!--[if !supportLists]-->l <!--[endif]-->可測試總線采樣點
<!--[if !supportLists]-->l <!--[endif]-->可產生bus off故障
<!--[if !supportLists]-->l <!--[endif]-->可編程控制
|
1
|
|
6
|
機柜
|
<!--[if !supportLists]-->l <!--[endif]-->定制機柜,38U,含柜體,L型支架
<!--[if !supportLists]-->l <!--[endif]-->定制柜門、定制側面板
<!--[if !supportLists]-->l <!--[endif]-->機柜面板,包括定制1U,3U擋板,及系統LOGO面板
<!--[if !supportLists]-->l <!--[endif]-->機柜插箱,包括安裝測試測量設備定制插箱設計和制作(示波器、萬用表等定制安裝插箱)
<!--[if !supportLists]-->l <!--[endif]-->設置緊急按鈕
<!--[if !supportLists]-->l <!--[endif]-->機柜高度不超過220cm
|
1
|
|
7
|
電源基礎模塊
|
<!--[if !supportLists]-->l <!--[endif]-->≥4個電源模塊槽位
<!--[if !supportLists]-->l <!--[endif]-->總功率支持400w
|
1
|
|
8
|
四象限電源(物理層測試專用)
|
輸出±6V/±3A或±20V/±1A
|
1
|
|
9
|
程控電源模塊
|
<!--[if !supportLists]-->l <!--[endif]-->可編程電源
<!--[if !supportLists]-->l <!--[endif]-->最大功率300W
<!--[if !supportLists]-->l <!--[endif]-->大電壓30V
<!--[if !supportLists]-->l <!--[endif]-->最大電流20A
|
1
|
|
10
|
臺式萬用表(物理層測試專用)
|
Fluke 8846A,電流、電阻、電容測量
|
1
|
|
11
|
總線示波器(物理層測試專用)
|
支持CAN/LIN信號采集分析,含示波器及上架套件、程控接口
|
1
|
|
12
|
工控機(運行測試用例)
|
<!--[if !supportLists]-->l <!--[endif]-->CPU:≥i5或i7四核處理器,主頻≥2.8GHz
<!--[if !supportLists]-->l <!--[endif]-->內存:≥16GB
<!--[if !supportLists]-->l <!--[endif]-->固態硬盤:≥256G
<!--[if !supportLists]-->l <!--[endif]-->機械硬盤:≥1T
<!--[if !supportLists]-->l <!--[endif]-->操作系統:Window 10 專業版
<!--[if !supportLists]-->l <!--[endif]-->網口數量:≥3個
<!--[if !supportLists]-->l <!--[endif]-->USB接口:≥4個
|
1
|
|
13
|
顯示器
|
≥24寸
|
1
|
|
14
|
機柜集成及調試
|
<!--[if !supportLists]-->l <!--[endif]-->測試系統信號路由設計開發。包括:分析平臺資源需求及設備資源,包括板卡、電源及其它測試/測量設備的通道資源,制定測試系統信號路由設計文檔,滿足測試系統集成及維護的要求。
<!--[if !supportLists]-->l <!--[endif]-->機柜集成線束開發。包括:依據制定的系統信號路由關系及線路信號特征,定義線束、線路標簽、走線路徑,進行線束開發制作,并撰寫相關使用及維護文檔。
<!--[if !supportLists]-->l <!--[endif]-->程控設備集成開發。包括:程控電源、示波器、萬用表、CAN干擾儀等程控設備接口程序開發及集成調試;
<!--[if !supportLists]-->l <!--[endif]-->系統開環測試。驗證各路信號正確性和完備性,確保與器件特性及功能需求保持一致。
|
1
|
|
15
|
CAN節點級網絡測試腳本庫
|
<!--[if !supportLists]-->l <!--[endif]-->依據GEEA2.0 CAN節點級測試規范,提供測試腳本開發,并針對一個節點完成調試,包含物理層、數據鏈路層、交互層、節點管理;
<!--[if !supportLists]-->l <!--[endif]-->必要的腳本要開源,使甲方可以根據需求自行變更腳本
|
1
|
|
16
|
CAN網絡管理的測試腳本庫
|
<!--[if !supportLists]-->l <!--[endif]-->依據CAN 節點級網絡管理測試規范,提供開源測試腳本,并針對一個節點完成調試;
<!--[if !supportLists]-->l <!--[endif]-->必要的腳本要開源,使甲方可以根據需求自行變更腳本
|
1
|
|
17
|
LIN主節點開源測試腳本庫
|
<!--[if !supportLists]-->l <!--[endif]-->依據GEEA2.0 LIN主節點級測試規范,提供測試腳本開發,并針對一個節點完成調試,包含物理層、數據鏈路層、交互層
<!--[if !supportLists]-->l <!--[endif]-->必要的腳本要開源,使甲方可以根據需求自行變更腳本
|
1
|
|
18
|
CarConfig測試腳本庫
|
<!--[if !supportLists]-->l <!--[endif]-->依據GEEA2.0 CarConfig slave測試規范,開發適用于TCU的節點的腳本
<!--[if !supportLists]-->l <!--[endif]-->必要的腳本要開源,使甲方可以根據需求自行變更腳本
|
1
|
|
19
|
通信DTC測試腳本庫
|
<!--[if !supportLists]-->l <!--[endif]-->依據通信DTC測試規范,開發適用于TCU黑盒測試的腳本
<!--[if !supportLists]-->l <!--[endif]-->必要的腳本要開源,使甲方可以根據需求自行變更腳本
|
1
|
|
20
|
TCU VFC測試工程
|
<!--[if !supportLists]-->l <!--[endif]-->基于GEEA2.0 TCU VMM測試要求,開發VFC自動化測試腳本
<!--[if !supportLists]-->l <!--[endif]-->必要的腳本要開源,使甲方可以根據需求自行變更腳本
|
1
|
|
21
|
TCU VMM測試工程
|
<!--[if !supportLists]-->l <!--[endif]-->基于GEEA2.0 TCU VMM測試要求,針對不依賴閉環模式的VMM開發自動化測試腳本
<!--[if !supportLists]-->l <!--[endif]-->必要的腳本要開源,使甲方可以根據需求自行變更腳本
|
1
|
|
22
|
測試系統軟件
|
<!--[if !supportLists]-->l <!--[endif]-->測試系統軟件包括板卡配置管理軟件、自動化測試軟件、測試管理軟件等
|
1
|
京公網安備 11010802028602號